 |
 |
 |
 |
 |
 |
 |
 |
CLICK ON THUMBNAIL FOR FULL IMAGE
The PULSE PAK® is a compact pumping system that utilizes a small footprint. The Pulse Pak provides the efficiencies of Variable Frequency Drive (VFD) and Programmable Logic Controller (PLC) in a skid mounted product. It is a very economical unit. Typical use of the Pulse Pak would be large green spaces such as executive golf courses, parks and sports complexes. Pump efficiencies from 72% to 80%, motor efficiencies of 92%
DESIGN CRITERIA
- Flow Rates from 100-800 gpm
- Pressures from 50-175 psi
- Flow Rates from 6.0 - 50.0 l/s
- Pressures from 350 - 1200 K Pa
- Voltages
- Units available in 230, 460 and 600 volt (3 phase), including 230 and 460 volt (single phase)
- Single phase up to 800 gpm
- Quality Construction
- Fabricated steel discharge pump heads
- Heavy duty pump construction with cast iron bowls, bronze impellers and stainless steel shafts
- High efficiency (72% to 80%), 3600 RPM, vertical multi-stage pumps
- VFD rated, high efficiency vertical solid Shaft Motors
- Silent Wafer Check Valves on each pump with positive spring closure
- Wafer style pump isolation butterfly valves rated at 200 psi
- Pump station relief valve
- Continuous weld deck plate
- Grit blast of all piping and structural members
- Multi-stage,high efficiency Pressure Maintenance Pump (PMP)
- 6-8 mil Epoxy Paint Process - grit blasted
- 2 1/2” liquid filled pressure gauge with isolation valves
- Quality Electronic Controls
- CSA and UL approved panel
- Monochrome Text Operator interface displays pressure, flow and operating conditions
- All motors and panels are colour coded to eliminate any wiring phase installation errors
- Stainless steel pressure transducers rated at 250 psi
- Internally air cooled VFD for maintenance free operation
- Power disconnect switch with door interlock
- Fused motor protection
- Variable frequency Drive with built-in line reactor for added protection
- Pump heat sensors with auto re-prime as optional equipment
- Low discharge pressure shutdown
- High discharge pressure shutdown
- Low water level shutdown
- VFD fault safety shutdown
- Surge and Lightning Protection
- Individual run time monitoring
- Automatic Ramp from 0 pressure to set point (algorithemically controlled)
- Options Available
- Flow meter
- Automatic re-prime feature
Specifications on the mechanical, electrical, installation, and warranty of pump stations.
Please take a moment to read our Pump Station Glossary for more information on understanding pumping stations.
The downloadable documents can be viewed in Adobe Acrobat, if you do not have this program please click on the icon above to download the program.