 |
 |
 |
 |
 |
 |
 |
 |
CLICK ON THUMBNAIL FOR FULL IMAGE
The PULSE® provides the customer with an energy efficient, reliable product at an affordable price. The PULSE® is available with turbine or submersible style pumps. The small footprint of this pumping system allows you to install the skid in a 9 square meter (100 square foot) building. The pump station has the same basic features as the Pulse Pro.
DESIGN CRITERIA
- Available with submersible or vertical turbine pumps
- Pump efficiencies from 72 to 86%, motor efficiencies 86% to 93%
- Flow Rates from 600-1500 gpm (37 to 95 l/s)
- Pressures from 50-175 psi (350 -1200 Kpa)
- Voltages
- Available in 230/460/600 volt 3-phase
- Available in single phase 230/460 up to 1500 usgpm
- Quality Construction
- Fabricated steel or cast iron pump discharge heads
- Positive air relief on discharge heads with no moving parts
- Valvmatic 1400 style, wafer type check valves
- High efficiency turbine pumps with cast iron bowls, bronze impellers and stainless steel shafts
- Clayton pressure relief valve to allow constant speed operation of the pumping system
- Lever operated, wafer style pump isolation valves on each pump
- Discharge lever handle isolation valves up to 6", gear operated valves 6"
- Integral wet well access hatch
- Grit blasted subsurface with 6-8 mil Epoxy Paint Process
- Continuous weld deck plate
- 0 -300 psi, silicone-filled, pressure gauge on discharge manifold
- Discharge pipe with ball valve isolation winterizing port
- Quality Electronic Controls
- CSA and UL approved panel with safety door inter-lock switch
- Simple pump operation and easy access to information windows with text/graphic operator interface
- Air cooled control panel
- Stainless steel pressure transducers rated at 250 psi
- Fused motor and overload protection
- Variable Frequency Drive (VFD) with input line reactor for extra protection
- Surge and Lightning Protection
- VFD fault shutdown with auto-restart
- System phase failure, phase imbalance and phase reversal protection
- Low Voltage, High Voltage protection
- Individual run time and motor start monitoring
- Automatic alternation of VFD pumps
- Fault alarm list with time and date log
- Automatic Ramp algorithm to bring pressure from 0 to setpoint while protecting the irrigation system
- Options Available
- 1800 RPM lubricated shaft turbine pumps
- Flow meter spool with Muis digital flow meter
Specifications on the mechanical, electrical, installation, and warranty of pump stations.
Please take a moment to read our Pump Station Glossary for more information on understanding pumping stations.
The downloadable documents can be viewed in Adobe Acrobat, if you do not have this program please click on the icon above to download the program.